Find your ideal sample storage tube: Tube Wizard

Micronic EFC 96-3 Rack RM

The Micronic EFC 96-3 Rack RM is 99% made of in-house renewed material. The Eco Rack is designed for 1.10ml internally or externally threaded tubes and 1.40ml internally or externally threaded tubes. The EFC 96-3 Rack RM is offered with a low cover for the 1.10ml tubes and a high cover for the 1.40ml tubes. The EFC 96-3 Rack RM is standard available with a 1D barcode and a human readable laser etched code on the side.

Request a quote
Request expert advice

Our Standards

Product Quality Information

Certified Class 7 clean room

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).

Virgin material and approvals

For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.

Extractables

The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.

RNase, DNase and endotoxin (pyrogen)

By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.

Laser-etched codes

The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.

Product quality control

Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.

CE marking

Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.

Decontamination

Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.

IATA

Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).

If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.

Our solutions

Embracing a greener future

Product manufacturing is evolving due to several factors such as customer demands, regulatory requirements, resource scarcity and environmental concerns. As a result, there is an increasing demand among several industries towards more sustainable practices.

A new reality requires new solutions. Therefore, the EFC 96-3 Rack RM is made of 99% RENEWED material. The racks are an ideal solution for laboratories committed to embracing a greener future. The racks are uniquely made from scrap material sourced from Micronic’s own production facility in the Netherlands. Residual material from the injection molding process that is suitable for renewing is separated. Stringent quality control measures ensure no compromise in quality or integrity during the renewal process, guaranteeing high-quality renewed material. The various EFC Racks adhere to all quality standards comparable to those of racks made from virgin material.

Moreover, the entire range seamlessly integrates with automated storage systems and liquid handlers, because the racks adhere to the standard ANSI/SLAS (American National Standards Institute/ Society for Laboratory Automation and Screening) dimensional footprint. Each EFC Rack comes standard with a cover and lockers made from virgin polypropylene, for easy recycling. The 1D barcode and human readable code on the rack side guarantees traceability along with visual identification or verification. The Micronic EFC Racks combine sustainability, efficiency and quality.

RECYCLED

99% made of renewed material

Rack identifiers

Unique laser-etched Alphanumeric coding on top of the rack, 1D barcode with a human readable code on the side of the rack and a 2D Data-Matrix code on the bottom

UNIQUE

A new sustainable standard for sample storage racks

Compatibility

Compatible with the leading sample storage automation systems (-20°C, -80°C and lower temperatures)

RNASE/DNASE/PYROGENS

Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)

CLASS 7 CLEAN ROOM

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment

Parameter	Micronic EFC RM 96-3 Rack
Rack Material	Renewed PP
Cover and Locker Material	Highest Purity PP
Rack height	27mm
Height with low cover	47.7mm
Height with high cover	54.7mm
Rack length	127.8mm
Rack width	85.5mm
Chemical resistance	+++
Temperature range	Vapor phase LN2 to +100ºC

At Micronic our goal is to advance research by serving scientists in finding solutions that contribute to a higher quality of life. This is why it makes us particularly proud to supply the researchers of JUST with the consumables they need for their robotic discovery platform.

Read full testimonial

“I chose Micronic because of the space saving 96-well rack format; more sample material could fit in the freezer compared to products from other companies. The screw cap also stays securely in place during long-term storage in -80°C."

Read full testimonial

“We want to be able to handle and store our samples easily and effortlessly. The Micronic solution supports us in this. The capping equipment and TPE push caps have been super-efficient and easy to use."

Read full testimonial

"We are very happy with the tubes of Micronic, it is truly more efficient and space saving than we had in the past. Next to that, the fact that the tube positions are laser-etched in the rack itself is very helpful. We always know where the A1 tube is located."

Read full testimonial

"We chose Micronic because of their strong reputation in Biobank sample storage, the good quality of their automation-compatible products and the assured traceability that their laser etched 2D coded tubes provide."

Read full testimonial

PhD candidate at LUMC Nienke van Rein chose Micronic because of the space saving 96-well rack format

Eat Just (USA)

Tube storage racks in 96-well format

Article Number	Description	Unit Size	Case Size
MP51704	Micronic EFC 96-3 Rack RM with cover for 1.10ml tubes capped with Push Caps or Screw Caps (empty) (Barcoded A1-H1 side)	10 racks	4
MP51705	Micronic EFC 96-3 Rack RM with high cover for 1.40ml tubes capped with Push Caps or Screw Caps (empty) (Barcoded A1-H1 side)	10 racks	2

1.40ml Push Cap tubes Round bottom

Article Number	Description	Unit Size	Case Size
MP32170	1.40ml Non coded Push Cap tubes (standard) round bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP42170	1.40ml Alphanumeric coded Push Cap tubes (standard) round bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

1.10ml Screw Cap tubes with Internal Thread V-bottom

Article Number	Description	Unit Size	Case Size
MP32175	1.10ml Non coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-3 Rack RM with cover (Barcoded A1-H1 side)	10 racks	4
MP52602	1.10ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-3 Rack RM with cover (Barcoded A1-H1 side)	10 racks	4
MP52602-Z20	1.10ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom precapped with Grey Screw Cap in Micronic EFC 96-3 Rack RM with cover (Barcoded A1-H1 side)	10 racks	4

1.40ml Screw Cap Tubes with Internal Thread V-bottom

Article Number	Description	Unit Size	Case Size
MP32176	1.40ml Non coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP42175	1.40ml Alphanumeric coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP52603	1.40ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

1.40ml Screw Cap Tubes with Internal Thread U-bottom

Article Number	Description	Unit Size	Case Size
MP32177	1.40ml Non coded Screw Cap tubes with Internal Thread U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP42176	1.40ml Alphanumeric coded Screw Cap tubes with Internal Thread U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP52606	1.40ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

1.40ml Push Cap Tubes with V-bottom

Article Number	Description	Unit Size	Case Size
MP32178	1.40ml Non coded Push Cap tubes V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP42177	1.40ml Alphanumeric coded Push Cap tubes V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

1.40ml Push Cap Tubes with U-bottom

Article Number	Description	Unit Size	Case Size
MP32179	1.40ml Non coded Push Cap tubes U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP42178	1.40ml Alphanumeric coded Push Cap tubes U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP52608	1.40ml 2D Data-Matrix coded Push Cap tubes U-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

1.10ml Screw Cap Tubes with External Thread V-bottom

Article Number	Description	Unit Size	Case Size
MP52753	1.10ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic EFC 96-3 Rack RM with cover (Barcoded A1-H1 side)	10 racks	4
MP52753-G71	1.10ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap IG in Micronic EFC 96-3 Rack RM with cover (Barcoded A1-H1 side)	10 racks	4

1.40ml Screw Cap Tubes with External Thread V-bottom

Article Number	Description	Unit Size	Case Size
MP32159	1.40ml Non coded Screw Cap tubes with External Thread V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP52766	1.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4
MP52766-G71	1.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap IG in Micronic EFC 96-3 Rack RM with high cover (Barcoded A1-H1 side)	10 racks	4

Amber Tan

fill out the form below

Hidden
Subject
Micronic EFC 96-3 Rack RM
Name*
Company*
Email*
Phone*
Country*
Message*
Get e-news?*
CAPTCHA
Email
This field is for validation purposes and should be left unchanged.

Flyer Trifold Micronic EFC Range Download

Micronic EFC 96-3 Rack RM

Embracing a greener future

Micronic EFC 96-3 Rack RM

Product information

What our customers say