Small tube quantities
Tube Trial Packs
With a Micronic Tube Trial Pack, you can test a small quantity of Micronic tubes, caps, and racks to see if they're suitable for your research application.
Find your ideal sample storage tube: Tube Wizard
Starter Packs
Starter Pack Premium
The Micronic Starter Packs are ideal for research laboratories that want to start using 2D coded tubes, or for those who are not satisfied with their current supplier and would like to try the high quality of Micronic products. Considering the amount of samples, the size of the lab and degree of automation, Micronic offers the Sample Storage Starter Packs in a range of formats: BASIC, STANDARD, PREMIUM and PREMIUM+. All the Micronic Starter Packs contain 2D coded tubes with screw or push caps, scanners, and manual or electric (de)cappers.
- Save up to 20% compared to buying the products individually
- Enables labs to start storing and sealing up to 4,000 samples
- Available with 0.75ml, 1.00ml, 1.40ml, 3.00ml, 3.50ml or 4.00ml tubes
- Ideal and convenient to different lab sizes and needs
- Class 7 clean-room production
- DNase/RNase and Pyrogene free
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
EVERYTHING YOU NEED TO GET GOING...
Micronic Starter Packs contain everything needed to start using 2D coded sample storage tubes, enabling laboratory workers to maintain a secure sample logistics system and eliminate the costly possibility of false sample identities. Since the amount of stored samples differs by the extent of automation and laboratory applications, Micronic offers the Starter Packs in a range of configurations and sizes: Basic, Standard, Advanced, Premium and Premium+.
Starter Packs Premium with Screw Caps contains:
- 40 racks filled with 0.75ml or 1.40ml tubes (internally threaded tubes)
- Enough Screw Caps for capping all 40 racks
- Micronic Rack Reader DR505 which reads whole racks filled with tubes straight from the freezer
- Screw Cap Recapper CS500 decaps or recaps a row of 8 tubes in less than 5 seconds
- Manual Screw Cap Decapping tools
or
- 40 racks filled with 0.75ml or 1.40ml tubes (externally threaded tubes)
- Enough Screw Caps for capping all 40 racks
- Micronic Rack Reader DR505 which reads whole racks filled with tubes straight from the freezer
- Screw Cap Recapper CS500 decaps or recaps a row of 8 tubes in less than 5 seconds
- Manual Screw Cap Decapping tools
Starter Pack Premium with Push Caps contains:
- 40 racks filled with 0.75ml or 1.40ml tubes (internally threaded tubes)
- Enough Push Caps for capping all 40 racks
- Micronic Rack Reader DR505 which reads whole racks filled with tubes straight from the freezer
- Micronic Push Cap Capper CP400
- Manual Push Cap Decapping tools
Testimonials
What our customers say
article numbers
Ordering information
| Article Number | Description | Unit Size |
|---|---|---|
| MP50231C | 0.75ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom Starterpack PREMIUM consisting of: | |
| MP52520 0.75ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-2 Rack with high cover (Barcoded A1-H1 side) | 40 racks | |
| MP53120 Screw Caps for internally threaded tubes in 96-well format - Grey | 4x960 caps | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35421 Micronic Screw Cap Recapper CS500 | 1 unit | |
| MP54004 Manual Screw Cap remover | 4 pieces | |
| MP50232C | 1.40ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom Starterpack PREMIUM consisting of: | |
| MP52551 1.40ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-4 Rack with high cover (Barcoded A1-H1 side) | 40 racks | |
| MP53120 Screw Caps for internally threaded tubes in 96-well format - Grey | 4x960 caps | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35421 Micronic Screw Cap Recapper CS500 | 1 unit | |
| MP54004 Manual Screw Cap remover | 4 pieces | |
| MP50264C | 0.75ml 2D Data-Matrix coded Screw Cap tubes with external thread V-bottom Starterpack PREMIUM consisting of: | |
| MP52706 0.75ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-2 Rack with high cover (Barcoded A1-H1 side) | 40 racks | |
| MP53871 Screw Caps IG for externally threaded tubes in 96-well format - Grey | 4x960 caps | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35420 Micronic Screw Cap Recapper CS500 | 1 unit | |
| MP54004 Manual Screw Cap remover | 4 pieces | |
| MP50265C | 1.40ml 2D Data-Matrix coded Screw Cap tubes with external thread V-bottom Starterpack PREMIUM consisting of: | |
| MP52710 1.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-4 Rack with high cover (Barcoded A1-H1 side) | 40 racks | |
| MP53871 Screw Caps IG for externally threaded tubes in 96-well format - Grey | 4x960 caps | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35420 Micronic Screw Cap Recapper CS500 | 1 unit | |
| MP54004 Manual Screw Cap remover | 4 pieces |
| Article Number | Description | Unit Size |
|---|---|---|
| MP50233C | 0.75ml 2D Data-Matrix coded Push Cap tubes V-bottom Starterpack PREMIUM consisting of: | |
| MP52535 0.75ml 2D Data-Matrix coded Push Cap tubes V-bottom in Micronic 96-2 Rack with low cover (Barcoded A1-H1 side) | 40 racks | |
| MP53068 Pierceable TPE Capcluster Grey for capping 96 individual tubes with Internal Thread | 4x10 mats | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35050 Micronic Push Cap Capper CP400 | 1 unit | |
| MP54000 Manual Decapper-1 | 10 pieces | |
| MP54001 Manual Decapper-8 | 10 pieces | |
| MP50234C | 1.40ml 2D Data-Matrix coded Push Cap tubes V-bottom Starterpack PREMIUM consisting of: | |
| MP52554 1.40ml 2D Data-Matrix coded Push Cap tubes V-bottom in Micronic 96-4 Rack with low cover (Barcoded A1-H1 side) | 40 racks | |
| MP53068 Pierceable TPE Capcluster Grey for capping 96 individual tubes with Internal Thread | 4x10 mats | |
| MP35221 Micronic Rack Reader DR505 | 1 unit | |
| MP35050 Micronic Push Cap Capper CP400 | 1 unit | |
| MP54000 Manual Decapper-1 | 10 pieces | |
| MP54001 Manual Decapper-8 | 10 pieces |
contact
Interested in this product?
We're here to help you with any questions you might have
Ed Sheridan
fill out the form below
Related products
More interesting products
Starter Pack Basic
The Micronic Starter Pack Basic has 10 racks of 0.75ml or 1.40ml tubes and caps, a Handheld Scanner and Single Tube Reader, and manual decapping tools.
Micronic Rack Reader DR505
The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.
Micronic Side Barcode Readers
When mounted on the side of a Micronic Rack Reader, both the 1D rack barcode and 2D Data-Matrix tube codes can be read simultaneously.