Micronic 24-1 Rack for1.50ml and 3.00ml Sample Tubes

Find your ideal sample storage tube: Tube Wizard

Download our 2024 product catalog

Request a quote
Request expert advice

Our Standards

Product Quality Information

Certified Class 7 clean room

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).

Virgin material and approvals

For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.

Extractables

The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.

RNase, DNase and endotoxin (pyrogen)

By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.

Laser-etched codes

The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.

Product quality control

Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.

CE marking

Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.

Decontamination

Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.

IATA

Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).

If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.

Our solutions

A RESULT OF EXTENSIVE RESEARCH

One of the most important properties tube storage racks need to have is their resistance against extreme conditions. Micronic conducted research on all kinds of materials and rack designs in order to come to a perfect match for use in ultra-low temperatures. As a result of extensive testing, the Micronic ULT Racks are manufactured from virgin Polycarbonate. Racks made from this material have excellent properties for low temperature conditions which make them ideal for long term use in automated cryogenic storage facilities. The material used to manufacture the racks is selected on quality and the highest purity levels. The racks have an extremely strong design which minimizes deformation due to temperature changes.

The Micronic ULT Racks, as well as its tubes and caps, are manufactured and assembled under US Federal Standard 209E Class 7 clean room conditions. Micronic manufactured products comply with the highest injection molding standards and are free of any detectable RNase or DNase contamination. Micronic is also able to limit the endotoxin (pyrogen) level of produced and packaged articles to an acceptable minimum (< 0.01 EU/ml) by maintaining the highest possible hygiene level during the production processes.

Alphanumeric coding

Unique laser-etched Alphanumeric coding on top of the rack

ultra-low temperatures

Made from Polycarbonate which has excellent properties for low temperatures

"icebreaker" mechanism

Novel locking system for cryogenic storage: "icebreaker" mechanism

Compatibility

Compatible with the leading sample storage automation systems (-20°C, -80°C and lower temperatures)

RNASE/DNASE/PYROGENS

Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)

CLASS 7 CLEAN ROOM

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment

Parameter	Micronic 24-1 Rack
Material	Highest Purity PC
Rack height	12.0mm
Height with cover	23.8mm (or 30.8mm with high cover)
Rack length	127.8mm
Rack width	85.5mm
Chemical resistance	++/+
Temperature range	Vapor phase LN2 to +140ºC

The University of Edinburgh and the Natural History Museum are using, as part of the 'Insect Pollinators Initiative', the Micronic 4.00ml tube for storing the larger insects in the collection.

Read full testimonial

“We used the 6.00ml externally threaded tubes with 2D Data-Matrix code on the bottom. It was critical for us to have a good sample ID, so the 2D Data-Matrix code on the bottom and the 1D Rack barcode helped us to keep good track of our samples.”

Read full testimonial

The Generation R study is a great example of how Micronic products are used in laboratories around the world preserving the integrity of samples for many years.

Read full testimonial

Sampled is an American based company that gives laboratories the ability to outsource various services, like sample management, sample storage, multiomics, cellular services and kitting and logistics.

Read full testimonial

"We chose Micronic because of their strong reputation in Biobank sample storage, the good quality of their automation-compatible products and the assured traceability that their laser etched 2D coded tubes provide."

Read full testimonial

Natural History Museum (UK)

Tube storage racks in 24-well format

Article Number	Description	Unit Size	Case Size
MP51404	Micronic 24-1 Rack with low cover for 1.50ml tubes capped with Screw Caps (empty) (barcoded A1-D1 side)	10 racks	4
MP51406	Micronic 24-1 Rack with high cover for 3.00ml tubes capped with Screw Caps (empty) (barcoded A1-D1 side)	10 racks	4

24-well format tubes without caps

Article Number	Description	Unit Size	Case Size
MP52954	1.50ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid WHR Flat bottom in Micronic 24-1 Rack with low cover (Barcoded A1-D1 side)	10 racks	4
MP52955	1.50ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W00 Flat bottom in Micronic 24-1 Rack with low cover (Barcoded A1-D1 side)	10 racks	4
MP52960	3.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid WHR Flat bottom in Micronic 24-1 Rack with high cover (Barcoded A1-D1 side)	10 racks	4
MP52961	3.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W00 Flat bottom in Micronic 24-1 Rack with high cover (Barcoded A1-D1 side)	10 racks	4

Bas van Keulen

Download documentation

fill out the form below

Hidden
Subject
Micronic 24-1 Rack
Name*
Company*
Email*
Phone*
Country*
Message*
Get e-news?*
CAPTCHA
Comments
This field is for validation purposes and should be left unchanged.

Micronic Next Generation ULT Rack Range Download

1.50ml Tubes External Thread Hybrid

The 1.50ml tubes with external thread hybrid guarantee absolute sample traceability. The tubes are ideal for storing fresh frozen tissue samples. Working volume (+21°C): 1.45ml with Screw Cap.

View product

3.00ml Tubes External Thread Hybrid (24-well format)

The transparent part of the 3.00ml hybrid tube walls enable visual checking, while the 4 different coding concepts guarantee sample traceability. Working volume (+21°C): 2.45ml with Screw Cap.