TPE Capcluster-96
The Micronic TPE Capcluster is compatible with 96-well format tubes. The TPE Capcluster is available in Natural + 12 different colors, providing for visual color identification.
Find your ideal sample storage tube: Tube Wizard
Cappers & Decappers
Micronic Push Cap Decapper CP620
With the ever-growing requirement for higher sample throughput in many laboratories the Push Cap Decapper CP620 enables significant productivity gains to be made in the opening of multiple sample storage tubes. The internal cap grippers are developed in such a way that cross-contamination is minimized. The gripper moves down slightly into the cap while the rack in the sleigh is moving backwards, ensuring a smooth and safe removal of the caps. Through a friendly user interface the user chooses the correct rack to decap, without using different adapters.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
IN-HOUSE ASSEMBLY & EXCEPTIONAL SERVICE
The Micronic Capping & Decapping equipment is designed and assembled in-house. We have well-trained personnel on hand to provide service on equipment. These services range from annual maintenance, installation support and customization, to repairs.
High-level service is of paramount importance at Micronic. By assembling equipment in-house, Micronic’s equipment assembly personnel and engineers have the first-hand knowledge and skills necessary to perform services quickly and smoothly.
At Micronic, we are committed to offer top-of-the-line products, delivering exceptional quality, reliability and durability. Above all, we stand behind our solutions, and are confident that you will too. Micronic warrants that its products are of satisfactory quality and conform to applicable EU legislation. If the product turns out to be defective, Micronic will arrange to repair or replace the product during the warranty period. The warranty period begins on the day of Micronic’s invoice of the original product and ends after 1 year for (De)Capping equipment. Additionally, we offer calibration services for Micronic Screw Cap Recappers. The service ensures that the Recappers are set to a precise torque value for an optimal sealing performance.
features & benefits
Push Cap Decapper CP620
Operation
Operates stand-alone or in a fully automated environment
Safe
Minimizes cross-contamination
Compatibility
Compatible with the complete Micronic range of 96-format tubes with internal thread (up to 1.40ml)
Simple
Simple and safe operation
Quick
Decaps 96 tubes in under 20 seconds
CE-approved
CE-approved and conform UL
Specifications
Product information
| Parameter | Push Cap Decapper CP620 |
|---|---|
| Rack compatibility | ANSI/SLAS standard 96-format |
| Cycle time | 15-20 seconds |
| Dimensions | 55x25.5x36cm / 22x10x14inch |
| Weight | 25kg / 55lbs |
| Voltage | 115 - 230 V |
Testimonials
What our customers say
article numbers
Ordering information
PUSH CAP DECAPPER
| Article Number | Description | Unit Size |
|---|---|---|
| MP35000 | Push Cap Decapper CP620 for decapping TPE Caps | 1 unit |
Contact
Interested in this product?
We're here to help you with any questions you might have
Remi van Liempt
fill out the form below
Related products
More interesting products
Micronic Push Cap Capper CP600
The Push Cap Capper CP600 & CP610 can cap Micronic Push Caps (i.e. Capclusters or Capmats) on 96-format tubes with internal thread in rack.
0.50ml Tubes Internal Thread
Save between 35% - 50% of your freezer space. The small 0.50ml sample vials can be supplied non-coded, alphanumeric coded or with an 2D code. Working volume (+21ºC): 0.21ml with Screw Cap.
0.75ml Tubes Internal Thread
The 0.75ml tubes enable you to store your valuable samples in a safe and traceable way. Available in a push cap and screw cap version. Working volume (+21°C): 0.48ml with Screw Cap.