Save between 35% - 50% of your freezer space. The small 0.50ml sample vials can be supplied non-coded, alphanumeric coded or with an 2D code. Working volume (+21ºC): 0.21ml with Screw Cap.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at email@example.com.
Sterilization using Gamma Irradiation: Micronic products can be supplied gamma irradiated. Irradiation itself cannot guarantee that the product is free from any detectable RNases, DNases or pyrogens. Class 7 clean room production is therefore an essential requirement.
Sterilization using EtO Treatment: Micronic products can be supplied ethylene oxide treated. Using a novel ethylene oxide treatment process – Micronic’s consumable products are independently certified to be absolutely DNA-free and therefore provide the perfect medium for long-term, high integrity storage of forensic samples. Micronic is offering the DNA-free products in a special Tyvek packaging.
Pre-Capped: All Micronic tubes are available pre-capped. There are 12 different colors for your choice: Grey, White, Yellow, Orange, Red, Pink, Purple, Blue, Light Blue, Light Green, Green and Black.
Pre-Racked: All Micronic tubes are available pre-racked. The racks are based on the global recognized ANSI / SLAS standards for storage and features a laser etched 1D rack barcode.
|Parameter||0.40ml Tubes External Thread|
|Inner tube shape||V-bottom|
|Material||Medical approved Polypropylene (CE-IVD)|
|Working volume (+21ºC)||0.40ml (with Screw Cap) / 0.38ml (with Push Cap)|
|Tube height in rack||22.5mm (without cover)|
|Temperature range||Vapor phase LN2 to +100°C|
Using a unique tube coding system from Micronic, the Animal Sciences Group has been able to significantly improve the absolute traceability, throughput and long term storage integrity of labelled samples going through their laboratory.
"We use the Micronic sample storage products because the individual barcoded tubes allows us to easily swap tubes from plate to plate. As we have over 70,000 DNA samples, it is preferable to keep a sample in a single tube then split over several plates."
"We chose Micronic because of their strong reputation in Biobank sample storage, the good quality of their automation-compatible products and the assured traceability that their laser etched 2D coded tubes provide."
The Generation R study is a great example of how Micronic products are used in laboratories around the world preserving the integrity of samples for many years.
|Article Number||Description||Unit Size||Case Size|
|MP52716||0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom Bulk||960 tubes||5|
|MP52718||0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side)||10 racks||4|
|MP52716-Y20||0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap Bulk||960 tubes||5|
|MP52718-Y20||0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side)||10 racks||4|
|Article Number||Description||Unit Size||Case Size|
|MP53820||Screw Caps for externally threaded tubes in 96-well format - Grey||960 caps||1|
|MP53804||Screw Caps for externally threaded tubes in 96-well format - Yellow||960 caps||1|
|MP53800||Screw Caps for externally threaded tubes in 96-well format - Orange||960 caps||1|
|MP53802||Screw Caps for externally threaded tubes in 96-well format - Red||960 caps||1|
|MP53823||Screw Caps for externally threaded tubes in 96-well format - Light Green||960 caps||1|
|MP53803||Screw Caps for externally threaded tubes in 96-well format - Blue||960 caps||1|
|MP53801||Screw Caps for externally threaded tubes in 96-well format - White||960 caps||1|
|MP53821||Screw Caps for externally threaded tubes in 96-well format - Pink||960 caps||1|
|MP53809||Screw Caps for externally threaded tubes in 96-well format - Purple||960 caps||1|
|MP53806||Screw Caps for externally threaded tubes in 96-well format - Light Blue||960 caps||1|
|MP53805||Screw Caps for externally threaded tubes in 96-well format - Green||960 caps||1|
|MP53822||Screw Caps for externally threaded tubes in 96-well format - Black||960 caps||1|