The Micronic 48-1 Rack is developed to hold 48 individual 1.00ml (tissue) tubes. Next to the ANSI/SLAS footprint, ULT Racks are provided with more features ideal for automation.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at email@example.com.
Micronic 1.00ml tissue tubes with external thread are designed for the storage and transportation of fresh frozen tissue samples. The wide shallow opening and flat bottom of the tubes enable easy loading / removal of tissue samples using tweezers. Using externally threaded tubes for tissue storage eliminates the possibility of the sample coming into contact with the screw thread, greatly reducing the chance of cross-contamination while improving sample integrity.
Due to the unique injection molding technique used to manufacture the tissue tubes, the black code surface with 2D Data-Matrix code cannot be separated from the transparent tube. This ensures the absolute traceability of tissue samples. The tissue tubes are compatible with the Micronic Ultra-Low Temperature Rack Range in the industry standard ANSI/SLAS format and automated systems.
|Parameter||1.00ml Tissue Tubes External Thread|
|Inner Tube Shape||Flat bottom|
|Material||Highest purity Polyropylene|
|Working volume (+21ºC)||0.85ml|
|Maximum tissue size||0.40 x 0.40 x 0.70 cm|
|Tube height||16.0 mm|
|Tube height in rack||17.0 mm|
|Temperature range||Vapor phase LN2 to +100°C|
“We want to be able to handle and store our samples easily and effortlessly. The Micronic solution supports us in this. The capping equipment and TPE push caps have been super-efficient and easy to use."
“After a comprehensive evaluation of commercially available consumables we selected Micronic 0.75ml and 1.4ml tubes together with screw caps and Roborack storage racks to provide high integrity, long-term storage of our human blood, serum and plasma samples at –80°C."
Using a unique tube coding system from Micronic, the Animal Sciences Group has been able to significantly improve the absolute traceability, throughput and long term storage integrity of labelled samples going through their laboratory.
The Nees Institute for Plant Biodiversity selected Micronic 0.50ml 2D Data-Matrix coded tubes together with TPE caps to provide high integrity, long-term storage of their samples at -80°C.
|Article Number||Description||Unit Size||Case Size|
|MP52800||1.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom Bulk||480 tubes||5|
|MP52802||1.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom in Micronic 48-1 Rack with low cover (Barcoded A1-F1 side)||10 racks||4|
|MP52800-Y20||1.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom precapped with Grey Screw Cap Bulk||480 tubes||5|
|MP52802-Y20||1.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom precapped with Grey Screw Cap in Micronic 48-1 Rack with low cover (Barcoded A1-F1 side)||10 racks||4|
|Article Number||Description||Unit Size||Case Size|
|MP53425||Screw Caps for externally threaded tubes in 48-well format - Transparent||480 caps||1|
|MP53420||Screw Caps for externally threaded tubes in 48-well format - Grey||480 caps||1|
|MP53401||Screw Caps for externally threaded tubes in 48-well format - White||480 caps||1|
|MP53404||Screw Caps for externally threaded tubes in 48-well format - Yellow||480 caps||1|
|MP53400||Screw Caps for externally threaded tubes in 48-well format - Orange||480 caps||1|
|MP53402||Screw Caps for externally threaded tubes in 48-well format - Red||480 caps||1|
|MP53409||Screw Caps for externally threaded tubes in 48-well format - Purple||480 caps||1|
|MP53403||Screw Caps for externally threaded tubes in 48-well format - Blue||480 caps||1|
|MP53406||Screw Caps for externally threaded tubes in 48-well format - Light Blue||480 caps||1|
|MP53423||Screw Caps for externally threaded tubes in 48-well format - Light Green||480 caps||1|