The EVA Push Caps from Micronic provide a cost effective way to securely close sample storage tubes within a 96-well format.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at email@example.com.
Non-Coded tubes provide an affordable way to improve sample storage, handling, screening and logistics. Many laboratories use the Non-Coded tubes for short-term storage or intermediate processes such as the homogenization of samples using beads (Tech Note ‘Bead Beating Performance’ available upon request). The tubes can also be used for transportation of samples.
The alphanumeric code is a combination of alphabetic and numeric characters. The Alphanumeric Coded tubes are an excellent solution combining lower price and easy visual sample identification based on the tube position in the rack (A1 thru H12) using the alphanumeric code on the bottom of each tube.
|Parameter||1.40ml Tubes Round Bottom|
|Inner tube shape||U-bottom|
|Material||Highest purity Polypropylene|
|Working volume (+21ºC)||1.14ml|
|Tube height in rack||46.5mm (without cover)|
|Temperature range||-80°C to +100°C|
|Article Number||Description||Unit Size||Case Size|
|MP32022||1.40ml Non coded Push Cap tubes U-bottom Bulk||960 tubes||4|
|MP226RN||1.40ml Non coded Push Cap tubes U-bottom in refill carrier-96||10 refills||5|
|MP32134||1.40ml Non coded Push Cap tubes (standard) round bottom in Micronic 96-4 Rack with low cover (Barcoded A1-H1 side)||10 racks||4|
|MPW42002BC3||1.40ml Non coded Push Cap tubes U-bottom in Roborack-96 White (Barcoded A1-H1 side)||10 racks||4|
|MP22502||1.40ml Non coded Push Cap tubes U-bottom in Comorack-96 (polycarbonate)||10 racks||4|
|MP22400||1.40ml Non Coded Push Cap tubes U-bottom in disposable tubecarrier-96||10 racks||4|
|MP226RP||1.40ml Alphanumeric coded Push Cap tubes U-bottom in refill carrier-96||10 refills||5|
|MP42134||1.40ml Alphanumeric coded Push Cap tubes (standard) round bottom in Micronic 96-4 Rack with low cover (Barcoded A1-H1 side)||10 racks||4|
|MPW42003BC3||1.40ml Alphanumeric coded Push Cap tubes U-bottom in Roborack-96 White (Barcoded A1-H1 side)||10 racks||4|
|MP22501||1.40ml Alphanumeric coded Push Cap tubes U-bottom in Comorack-96 (polycarbonate)||10 racks||4|