The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at email@example.com.
The alphanumeric code is a combination of alphabetic and numeric characters. The Alphanumeric Coded tubes are an excellent solution combining lower price and easy visual sample identification based on
the tube position in the rack (A1 thru H12) using the alphanumeric code on the bottom of each tube.
The alphanumeric codes are permanently laser-etched using a patented 2K injection molding technique,
so the code surface and the transparent tube cannot be separated from each other.
Micronic’s 2D Data-Matrix coded tubes are used by many research laboratories worldwide in order to fully track and trace their valuable samples during the entire sample storage process. The unique 2D code identifies the sample, its coordinates within a storage rack, the particular rack and the location of the rack in the freezer. Next to ensuring reliable long-term sample identification, the high quality labware of Micronic also ensures that the integrity of samples is preserved over extended periods of time.
|Parameter||2.00ml Tubes Internal Thread|
|Inner tube shape||U-bottom|
|Material||Highest purity Polypropylene|
|Working volume (+21ºC)||1.58ml with Push cap / 1.49ml with Screw cap|
|Tube height in rack||61.5mm (without cover)|
|Temperature range||-80°C (always use a rack with cover) to +100°C|
“We chose Micronic because of their compatibility with liquid handling robotics, validated ultra-low binding tube properties, highly satisfying split push cap sealing performance, and the assured traceability that their laser etched 1D barcoded rack and 2D coded tubes provide."
Using a unique tube coding system from Micronic, the Animal Sciences Group has been able to significantly improve the absolute traceability, throughput and long term storage integrity of labelled samples going through their laboratory.
The University of Edinburgh and the Natural History Museum are using, as part of the 'Insect Pollinators Initiative', the Micronic 4.00ml tube for storing the larger insects in the collection.
The Generation R study is a great example of how Micronic products are used in laboratories around the world preserving the integrity of samples for many years.
|Article Number||Description||Unit Size||Case Size|
|MP42150||2.00ml Alphanumeric coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with low cover (Barcoded A1-H1-side)||6 racks||4|
|MP42151||2.00ml Alphanumeric coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1-side)||6 racks||4|
|MP52359||2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom Bulk||576 tubes||4|
|MP52570||2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with low cover (Barcoded A1-H1 side)||6 racks||4|
|MP52571||2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1 side)||6 racks||4|