Find your ideal sample storage tube: Tube Wizard

2.00ml Tubes Internal Thread

The 2.00ml tubes combine high sample storage capacity and absolute sample traceability in an industry standard 96-well configuration. The storage tubes are provided with an alphanumeric or unique 2D Data-Matrix code laser encrypted on the tube bottom to enable easy identification and traceable storage of your samples. The Micronic 2.00ml vials are standard available in the Micronic 96-5 Rack and optionally available in bulk.

Request a quote
Request expert advice

Our Standards

Product Quality Information

Certified Class 7 clean room

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).

Virgin material and approvals

For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.

Extractables

The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.

RNase, DNase and endotoxin (pyrogen)

By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.

Laser-etched codes

The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.

Product quality control

Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.

CE marking

Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.

Decontamination

Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.

IATA

Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).

If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.

Our solutions

Tube coding options

The alphanumeric code is a combination of alphabetic and numeric characters. The Alphanumeric Coded tubes are an excellent solution combining lower price and easy visual sample identification based on the tube position in the rack (A1 up to H12) using the alphanumeric code on the bottom of each tube. The alphanumeric codes are permanently laser-etched using a patented 2K injection molding technique, so the code surface and the transparent tube cannot be separated from each other.

Micronic’s 2D Data-Matrix coded tubes are used by many research laboratories worldwide in order to fully track and trace their valuable samples during the entire sample storage process. The unique 2D code identifies the sample, its coordinates within a storage rack, the particular rack and the location of the rack in the freezer. Next to ensuring reliable long-term sample identification, the high quality labware of Micronic also ensures that the integrity of samples is preserved over extended periods of time.

laser-etched codes

Alphanumeric codes, 2D codes and 1D rack barcodes are permanently laser etched

patented technique

Black code surface cannot be separated from the transparent tube due to the patented 2K injection molding technique

100% quality control

100% quality control on all 2D codes (readability and uniqueness)

RNASE/DNASE/PYROGENS

Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)

class 7 clean room

Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment

AVAILABLE OPTIONS

Sterilization using gamma irradiation or Eto treatment, precapped with screw or push cap, customized 2D tube code and 1D rack barcode

Parameter	2.00ml Tubes Internal Thread
Inner tube shape	U-bottom
Material	Highest purity Polypropylene
Working volume (+21ºC)	1.58ml with Push cap / 1.49ml with Screw cap
Tube height in rack	61.5mm (without cover)
Resistance	Chemical solvents
Temperature range	-80°C (always use a rack with cover) to +100°C

Using a unique tube coding system from Micronic, the Animal Sciences Group has been able to significantly improve the absolute traceability, throughput and long term storage integrity of labelled samples going through their laboratory.

Read full testimonial

"We are very happy with the tubes of Micronic, it is truly more efficient and space saving than we had in the past. Next to that, the fact that the tube positions are laser-etched in the rack itself is very helpful. We always know where the A1 tube is located."

Read full testimonial

“I chose Micronic because of the space saving 96-well rack format; more sample material could fit in the freezer compared to products from other companies. The screw cap also stays securely in place during long-term storage in -80°C."

Read full testimonial

The Nees Institute for Plant Biodiversity selected Micronic 0.50ml 2D Data-Matrix coded tubes together with TPE caps to provide high integrity, long-term storage of their samples at -80°C.

Read full testimonial

Sampled is an American based company that gives laboratories the ability to outsource various services, like sample management, sample storage, multiomics, cellular services and kitting and logistics.

Read full testimonial

PhD candidate at LUMC Nienke van Rein chose Micronic because of the space saving 96-well rack format

Animal Sciences Group (NL)

Article Number	Description	Unit Size	Case Size
MP42150	2.00ml Alphanumeric coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with low cover (Barcoded A1-H1-side)	6 racks	4
MP42151	2.00ml Alphanumeric coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1-side)	6 racks	4
MP52359	2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom Bulk	576 tubes	4
MP52570	2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with low cover (Barcoded A1-H1 side)	6 racks	4
MP52571	2.00ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread U-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1 side)	6 racks	4

Amber Tan

Download documentation

fill out the form below

Hidden
Subject
2.00ml Tubes Internal Thread
Name*
Company*
Email*
Phone*
Country*
Message*
Get e-news?*
CAPTCHA
Phone
This field is for validation purposes and should be left unchanged.

Micronic 2.00ml Tubes with Internal Thread Non coded & Alpanumeric coded Download Micronic 2.00ml Tubes with Internal Thread 2D Data-Matrix coded Download

Micronic Rack Reader DR505

The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.

View product

Micronic Side Barcode Readers

When mounted on the side of a Micronic Rack Reader, both the 1D rack barcode and 2D Data-Matrix tube codes can be read simultaneously.

View product

TPE Capcluster-96

The Micronic TPE Capcluster is compatible with 96-well format tubes. The TPE Capcluster is available in Natural + 12 different colors, providing for visual color identification.