0.75ml Tubes External Thread
The 0.75ml tubes with external thread are provided with a triple start thread which gives an excellent closure to ensure long-term sample preservation. Working volume (+21°C): 0.60ml with Screw Cap.
Find your ideal sample storage tube: Tube Wizard
Sample Storage Racks
Micronic 138-2 HD Rack
The Micronic 138-2 HD Rack is developed for 138 individual 0.75ml internally threaded or externally threaded (hybrid) tubes, or for 0.80ml externally threaded tubes. With its honeycomb design, the high density rack increases the number of samples that can be stored up to 43% compared to a standard rack in the ANSI/SLAS footprint. Absolute traceability and reproducibility on the racks is ensured through a unique laser etched 1D barcode on the side of the racks. The open bottom design of the storage racks facilitates quick defrosting of samples and permits tubes to be manipulated by robotic systems avoiding time-consuming procedures.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
THE USE OF THE MOST ADVANCED MATERIALS
The Micronic HD Rack is made to store more samples in an ANSI/SLAS format rack, and is especially designed to be compatible with automated processes. The rack side walls are closed for easy gripping with most robotic arms. In addition, the rack uses a unique open bottom design, which permits tubes to be manipulated by robotic systems avoiding time-consuming procedures. The rack contains twist-lock to be effective when twist-lock tubes are used. The Micronic HD Racks are manufactured from virgin Polycarbonate. Racks made from this material have excellent properties for low temperature conditions which make them ideal for long-term use in automated cryogenic storage facilities. The material used to manufacture the racks is selected on quality and the highest purity levels. The racks have an extremely strong design which minimizes deformation due to temperature changes.
The Micronic HD Racks, as well as its tubes, caps, and other racks are manufactured and assembled under NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is compatible to the US Federal Standard 209E class 10.000). Micronic manufactured products comply with the highest injection molding standards and are free of any detectable RNase or DNase contamination. Micronic is also able to limit the endotoxin (pyrogen) level of produced and packaged articles to an acceptable minimum (< 0.01 EU/ml) by maintaining the highest possible hygiene level during the production processes.
features & benefits
Micronic 138-2 HD Rack
Honeycomb design
With its honeycomb design, the high density rack increases the number of samples that can be stored up to 43% compared to a standard rack in the ANSI/SLAS footprint.
ultra-low temperatures
Made from Polycarbonate which has excellent properties for low temperatures
closed rack walls
Rack side walls are closed for easy gripping with most robotic arms
Compatibility
Compatible with the leading sample storage automation systems (-20°C, -80°C and lower temperatures)
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
CLASS 7 CLEAN ROOM
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications
Product information
| Parameter | Micronic 138-2 HD Rack |
|---|---|
| Material | Highest Purity Polycarbonate |
| Rack height | 20.2mm |
| Rack length | 127.8mm |
| Rack width | 85.5mm |
| Chemical resistance | ++/+ |
| Temperature range | Vapor phase LN2 to +100ºC |
Testimonials
What our customers say
article numbers
Ordering information
Tube Storage Racks in 138-well format
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51420 | Micronic 138-2 HD Rack without cover for 0.75ml tubes (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Screw Cap tubes with Internal Thread V-bottom without caps
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52525 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic 138-2 HD Rack without cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Screw Cap tubes with External Thread V-bottom without caps
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52727 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 138-2 HD Rack without cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.80ml Screw Cap tubes with External Thread V-bottom without caps
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52728 | 0.80ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 138-2 HD Rack without cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Screw Cap Tubes with External Thread Hybrid without caps
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52775 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W1D U-bottom in Micronic 138-2 HD Rack without cover (Barcoded A1-H1 side) | 10 racks | 4 |
Contact
get in touch
We're here to help you with any questions you might have
Bas van Keulen
fill out the form below
Related products
More interesting products
0.75ml Tubes Internal Thread
The 0.75ml tubes enable you to store your valuable samples in a safe and traceable way. Available in a push cap and screw cap version. Working volume (+21°C): 0.48ml with Screw Cap.
Including 1D and 2D code
0.75ml Tubes External Thread Hybrid
The hybrid tube combines automated and visual sample identification and guarantees the complete traceability of samples. Working volume (+21°C): 0.62ml with Screw Cap.
Screw Caps with External Thread
The Micronic Screw Caps for tubes with external thread have a triple start thread for the most optimal sealing quality, ensuring long-term sample preservation and storage at ultra-low temperatures.