The 3.00ml hybrid tubes are compatible with ANSI/SLAS format racks, standard cryo boxes, automated stores and liquid handlers. Working volume (+21°C): 2.90ml with Screw Cap.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at firstname.lastname@example.org.
One of the most important properties tube storage racks need to have is their resistance against extreme conditions. Micronic conducted research on all kinds of materials and rack designs in order to come to a perfect match for use in ultra-low temperatures. As a result of extensive testing, the Micronic ULT Racks are manufactured from virgin Polycarbonate. Racks made from this material have excellent properties for low temperature conditions which make them ideal for long term use in automated cryogenic storage facilities. The material used to manufacture the racks is selected on quality and the highest purity levels. The racks have an extremely strong design which minimizes deformation due to temperature changes.
The Micronic ULT Racks, as well as its tubes and caps, are manufactured and assembled under US Federal Standard 209E Class 7 clean room conditions. Micronic manufactured products comply with the highest injection molding standards and are free of any detectable RNase or DNase contamination. Micronic is also able to limit the endotoxin (pyrogen) level of produced and packaged articles to an acceptable minimum (< 0.01 EU/ml) by maintaining the highest possible hygiene level during the production processes.
|Parameter||Micronic 48-3 Rack|
|Material||Highest Purity PC|
|Height with cover||41.5mm|
|Temperature Range||Vapor phase LN2 to +140ºC|
Rutgers University Cell & DNA Repository selected Micronic 0.75ml and 1.40ml tubes together with colored TPE caps to provide high integrity, long-term storage of samples at -80°C.
“I chose Micronic because of the space saving 96-well rack format; more sample material could fit in the freezer compared to products from other companies. The screw cap also stays securely in place during long-term storage in -80°C."
The Nees Institute for Plant Biodiversity selected Micronic 0.50ml 2D Data-Matrix coded tubes together with TPE caps to provide high integrity, long-term storage of their samples at -80°C.
"We use the Micronic sample storage products because the individual barcoded tubes allows us to easily swap tubes from plate to plate. As we have over 70,000 DNA samples, it is preferable to keep a sample in a single tube then split over several plates."
|Article Number||Description||Unit Size||Case Size|
|MP51302||Micronic 48-3 Rack with high cover for 3.00ml tubes cappes with Screw Caps (empty) )(Barcoded A1-F1 side)||10 racks||4|
|Article Number||Description||Unit Size||Case Size|
|MP52864||3.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W1D Flat bottom in Micronic 48-3 Rack with high cover (Barcoded A1-F1 side)||10 racks||4|
|MP52865||3.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W00 Flat bottom in Micronic 48-3 Rack with high cover (Barcoded A1-F1 side)||10 racks||4|