The Micronic TPE Capcluster is compatible with 96-well format tubes. The TPE Capcluster is available in Natural + 12 different colors, providing for visual color identification.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at firstname.lastname@example.org.
The Micronic Capping & Decapping equipment is designed and assembled in-house. We have well-trained personnel on hand to provide service on equipment. These services range from annual maintenance, installation support and customization, to repairs.
High-level service is of paramount importance at Micronic. By assembling equipment in-house, Micronic’s equipment assembly personnel and engineers have the first-hand knowledge and skills necessary to perform services quickly and smoothly.
At Micronic, we are committed to offer top-of-the-line products, delivering exceptional quality, reliability and durability. Above all, we stand behind our solutions, and are confident that you will too. Micronic warrants that its products are of satisfactory quality and conform to applicable EU legislation. If the product turns out to be defective, Micronic will arrange to repair or replace the product during the warranty period. The warranty period begins on the day of Micronic’s invoice of the original product and ends after 1 year for (De)Capping equipment. Additionally, we offer calibration services for Micronic Screw Cap Recappers. The service ensures that the Recappers are set to a precise torque value for an optimal sealing performance.
|Parameter||Push Cap Decapper CP620|
|Rack compatibility||ANSI/SLAS standard 96-format|
|Cycle time||10-15 seconds|
|Dimensions||53x26x37cm / 21x10x14inch|
|Weight||25kg / 55lbs|
|Voltage||115 - 230 V|
At Micronic our goal is to advance research by serving scientists in finding solutions that contribute to a higher quality of life. This is why it makes us particularly proud to supply the researchers of JUST with the consumables they need for their robotic discovery platform.
Micronic is proud to be supplying 2D coded labware to support Clear Labs' cutting-edge and extremely important food analyses.
For its Rotterdam Study, the oldest long-term population health study in the Netherlands, Erasmus Medical Center has switched to the compact 2D coded tube system from Micronic for the storage of its biological samples.
“We want to be able to handle and store our samples easily and effortlessly. The Micronic solution supports us in this. The capping equipment and TPE push caps have been super-efficient and easy to use."
|Article Number||Description||Unit Size|
|MP35000||Push Cap Decapper CP620 for decapping TPE Caps||1 unit|