Micronic Rack Reader DR505
The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.
Find your ideal sample storage tube with our new Tube Configurator
Eco-Friendly Choice (EFC) Rack Range
Micronic EFC 96-2 Rack RM
Made of 99% renewed material, the Micronic Eco-Friendly Choice Rack RM is an important advancement for the life sciences market. The Eco Rack 96-2 holds 96 individual 0.75ml tubes with internal or external thread. Based on the global recognized ANSI/SLAS standards for storage racks, the sample storage Micronic EFC 96-2 Rack RM, features a laser-etched 1D Barcode and a Human readable code on the side for better visual identification.
Our Standards
Product Quality Information
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Sterilization
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
MADE FROM IN-HOUSE RENEWED MATERIAL
A new reality always requires new solutions. It is notable that there is an increasing demand among several industries towards more sustainable practices. Different factors as resource scarcity, regulatory requirements, environmental concerns and consumer demands can give rise to changes in the manufacturing of certain products.
The Micronic EFC 96-2 Rack RM is made of 99% RENEWED material. The racks are an ideal solution for laboratories committed to embracing a greener future. The racks are uniquely made from scrap material sourced from Micronic’s own production facility in the Netherlands. Residual material from the injection molding process that is suitable for renewing is separated. Stringent quality control measures ensure no compromise in quality or integrity during the renewal process, guaranteeing high-quality renewed material. The various EFC Racks adhere to all quality standards comparable to those of racks made from virgin material.
Moreover, the entire range seamlessly integrates with automated storage systems and liquid handlers, because the racks adhere to the standard ANSI/SLAS (American National Standards Institute/ Society for Laboratory Automation and Screening) dimensional footprint. Each EFC Rack comes standard with a cover and lockers made from virgin polypropylene, for easy recycling. The 1D barcode and human readable code on the rack side guarantees traceability along with visual identification or verification. The Micronic EFC Racks combine sustainability, efficiency and quality.
features & benefits
MICRONIC EFC 96-2 RACK RM
RECYCLED
99% made of renewed material
UNIQUE
A new sustainable standard for sample storage racks
RACK IDENTIFIERS
Unique laser-etched 1D barcode with a human readable code on the side of the rack
COMPATIBILITY
Compatible with the leading sample storage automation systems (-20°C, -80°C and lower temperatures)
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
CLASS 7 CLEAN ROOM
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications
Product information
| Parameter | Micronic EFC RM 96-2 Rack |
|---|---|
| Rack Material | Renewed PP |
| Cover and Locker Material | Highest Purity PP |
| Rack height | 17.5mm |
| Height with cover | 38.2mm |
| Rack length | 127.8mm |
| Rack width | 85.5mm |
| Chemical resistance | +++ |
| Temperature range | Vapor phase LN2 to +100ºC |
Testimonials
What our customers say
article numbers
Ordering information
Tube storage racks in 96-well format
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51703 | Micronic EFC 96-2 Rack RM with cover for 0.75ml tubes capped with Push Caps or Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Screw Cap tubes with Internal Thread V-bottom
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32172 | 0.75ml Non coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42172 | 0.75ml Alphanumeric coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52597 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Push Cap tubes with Internal Thread V-bottom
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32173 | 0.75ml Non coded Push Cap tubes V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42173 | 0.75ml Alphanumeric coded Push Cap tubes V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52598 | 0.75ml 2D Data-Matrix coded Push Cap tubes V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Push Cap tubes with Internal Thread U-bottom
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32174 | 0.75ml Non coded Push Cap tubes U-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42174 | 0.75ml Alphanumeric coded Push Cap tubes U-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52599 | 0.75ml 2D Data-Matrix coded Push Cap tubes U-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
0.75ml Screw Cap tubes with External Thread V-bottom
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32158 | 0.75ml Non coded Screw Cap tubes with External Thread V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52752 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52752-G71 | 0.75ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap IG in Micronic EFC 96-2 Rack RM with cover (Barcoded A1-H1 side) | 10 racks | 4 |
Contact
get in touch
We're here to help you with any questions you might have
Yusuke Takashima
fill out the form below
Related products
More interesting products
Request a free demo!
Micronic Screw Cap Recapper CS700
The award winning Micronic Screw Cap Recapper CS700 offers users the ability to cap, decap or recap 96, 48 or 24 tubes with Screw Caps in a single action.
Free samples available!
0.40ml Tubes External Thread
The automation-friendly 0.40ml tube enables efficient storage of low volumes of liquid samples. This tube has a massive working volume of 0.40ml (+21ºC) with Screw Cap.
Screw Caps with External Thread
The Micronic Screw Caps for tubes with external thread have a triple start thread for the most optimal sealing quality, ensuring long-term sample preservation and storage at ultra-low temperatures.