0.75ml X-Clear Tube
Exceptional transparency and durability for precise sample preparation and analysis. The 0.75ml sample vials feature a V-bottom and come with screw caps in a variety of colors. Working volume (-80°C): 0.55ml with Screw Cap.
Find your ideal sample storage tube: Tube Wizard
Code Readers
Micronic Tube Reader DT520
The Micronic Tube Reader DT520 is a next-generation tube reader that enhances lab productivity with a sleek design and a unique rack positioner that allows accurate reading of both 1D barcodes and 2D Data-Matrix codes. Capable of scanning all barcodes in under a second, the DT520 ensures faster and more reliable sample identification. A plug-and-play solution, the Micronic Tube Reader DT520 requires no software installation and is incredibly easy to use. The scanner features keyboard wedge functionality, for easy data transfer.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
IN-HOUSE ASSEMBLY & EXCEPTIONAL SERVICE
At Micronic, we develop and manufacture our premium labware and precision engineered equipment in-house. We are committed to offer top-of-the-line products, delivering exceptional quality, reliability and durability. Above all, we stand behind our solutions, and are confident that you will too.
Micronic Code Readers are assembled in the Netherlands and the United States. High-level service is of paramount importance at Micronic. Therefore, we have well-trained personnel on hand to provide service on equipment. These services range from annual maintenance, installation support and customization, to repairs.
Micronic warrants that its products are of satisfactory quality and conform to applicable EU legislation. If the product turns out to be defective, Micronic will arrange to repair or replace the product during the warranty period. The warranty period begins on the day the product was purchased from an authorized dealer and ends after 5 years for Micronic Reading equipment. In case of product replacement, the warranty start date remains the date of purchase of the original product. Micronic offers an industry leading warranty of 5 years, because we can!
Features & benefits
Tube Reader DT520
quick
Reads 1D & 2D rack codes and 1D & 2D Data-Matrix coded tubes in less than a second
compatibility
Compatible with 96-, 48- and 24-well rack and tube formats
Easy to use
No software installation and combined 1D barcode and 2D Data-Matrix code scanning locations ensure fast and accurate code reading
Plug & play
Keyboard wedge functionality
Confirmation
Sound indication when code is read
Warranty
5-year warranty!
specifications
product information
| Parameter | Tube Reader DT520 |
|---|---|
| System requirements | 1x USB port (at least 2.0) |
| Scan time | < 1 second |
| Weight | 321 grams / 0.7 lbs |
| Tube code reading | 1D / 2D rack codes and 1D / 2D tube codes |
Testimonials
What our customers say
Article numbers
Ordering information
Micronic Tube Reader DT510
| Article Number | Description | Unit Size |
|---|---|---|
| MP55129 | Micronic Tube Reader DT520 | 1 unit |
get in touch
Interested in this product?
We're here to help you with any questions you might have
Ed Sheridan
fill out the form below
Related products
More interesting products
Micronic Rack Reader DR505
The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.
0.75ml Tubes Internal Thread
The 0.75ml tubes enable you to store your valuable samples in a safe and traceable way. Available in a push cap and screw cap version. Working volume (+21°C): 0.48ml with Screw Cap.
Screw Cap Ultra
The Screw Caps Ultra of Micronic securely seal tubes for long-term sample storage at ultra-low temperatures. The silicon O-ring of the cap falls within the tube, sealing the tube with “hard” stop.