6.00ml Tubes Internal Thread
The 6.00ml Micronic storage tube in 24-well format has a large working volume of 4.80ml (+21ºC) with Screw Cap. These tubes are available non-coded or with an unique 2D Data Matrix code.
Find your ideal sample storage tube: Tube Wizard
Sample Storage Tubes
6.00ml Tubes External Thread Hybrid
The 6.00ml tubes with external thread hybrid guarantee sample traceability and optimize working volume. The transparent part of the tube walls enable easy visual checking of the sample, while the 4 coding concepts guarantee sample traceability. Samples can be identified with the 2D Data-Matrix, 1D barcode, numeric human readable and by written codes on the white surface of the tube. The high contrast 1D, 2D and human-readable codes are permanently laser-etched into the white surfaces, so that they can never wear or fall off.
Using externally threaded storage tubes eliminates the possibility of the sample coming into contact with the screw thread, minimizing chance of cross-contamination while improving sample integrity.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
AUTOMATED AND VISUAL SAMPLE IDENTIFICATION
The Micronic tubes with external thread hybrid uniquely combine automated and visual sample identification. The visual codes allow researchers to quickly identify samples or verify codes during the storage/retrieval process or field research. The transparent parts of the tube wall enable easy visual checking of the sample. The 1D and 2D barcode can be read by automated systems. The bottom code surface of the tubes features a raised edge, which protects the 2D Data-Matrix code against accidental scratches.
Due to the unique injection molding technique used to manufacture the hybrid tubes, the white bottom and side walls cannot be separated from the transparent tube. The high contrast 1D, 2D and human-readable codes are permanently laser-etched into the white surfaces, so that they can never wear or fall off. The triple screw thread of the hybrid tubes gives an excellent closure for long-term sample preservation and storage at ultra-low temperatures. To prevent the screw cap from overturning – manually or mechanically – the cap is designed with a unique lock when sealed. The cap is available in 12 different colors.
features & benefits
6.00ml Tubes External Thread Hybrid
Optimal Sealing
Triple start thread for optimal sealing quality
ultra-low temperature
Thick tube walls, sturdy design and excellent properties for ultra low temperature (vapor phase LN2) storage
100% quality control
100% quality control on all 2D codes (readability and uniqueness)
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
CLASS 7 CLEAN ROOM
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Available options
Sterilization using gamma irradiation or Eto treatment, precapped with screw cap, customized 2D tube code or 1D rack barcode
Specifications
Product information
| Parameter | 6.00ml Tubes External Thread Hybrid |
|---|---|
| Inner Tube Shape | Flat bottom |
| Material | Medical approved Polypropylene (CE-IVD) |
| Working volume (+21ºC) | 6.00ml |
| Tube height | 48.0mm |
| Tube height in rack | 48.8mm |
| Temperature | Vapor phase LN2 to +100ºC |
Testimonials
What our customers say
article numbers
Ordering information
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| W00 = White side walls without coding | |||
| W1D = White side walls with a 1D barcode & human readable code on one side wall | |||
| MP52963 | 6.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W1D Flat bottom Bulk | 240 tubes | 4 |
| MP52964 | 6.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W00 Flat bottom Bulk | 240 tubes | 4 |
| MP52966 | 6.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W1D Flat bottom in Micronic 24-4 Rack with high cover (Barcoded A1-D1 side) | 10 racks | 2 |
| MP52967 | 6.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Hybrid W00 Flat bottom in Micronic 24-4 Rack with high cover (Barcoded A1-D1 side) | 10 racks | 2 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP53525 | Screw Caps for externally threaded tubes in 24-well format - Transparent | 240 caps | 1 |
| MP53520 | Screw Caps for externally threaded tubes in 24-well format - Grey | 240 caps | 1 |
| MP53501 | Screw Caps for externally threaded tubes in 24-well format - White | 240 caps | 1 |
| MP53504 | Screw Caps for externally threaded tubes in 24-well format - Yellow | 240 caps | 1 |
| MP53500 | Screw Caps for externally threaded tubes in 24-well format - Orange | 240 caps | 1 |
| MP53502 | Screw Caps for externally threaded tubes in 24-well format - Red | 240 caps | 1 |
| MP53509 | Screw Caps for externally threaded tubes in 24-well format - Purple | 240 caps | 1 |
| MP53503 | Screw Caps for externally threaded tubes in 24-well format - Blue | 240 caps | 1 |
| MP53523 | Screw Caps for externally threaded tubes in 24-well format - Light Green | 240 caps | 1 |
Contact
get in touch
We're here to help you with any questions you might have
Chantal Schmitz
fill out the form below
Related products
More interesting products
Including 1D and 2D code
0.75ml Tubes External Thread Hybrid
The hybrid tube combines automated and visual sample identification and guarantees the complete traceability of samples. Working volume (+21°C): 0.62ml with Screw Cap.
Micronic Rack Reader DR505
The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.