1.40ml Tubes Internal Thread
The 1.40ml tubes with internal thread are provided with a code surface that cannot be separated from the tube. Working volume with Screw Cap (+21°C): 1.04ml (V-bottom) or 1.10ml (U-bottom).
Find your ideal sample storage tube: Tube Wizard
Sample Storage Racks
Comorack-96
The sample storage Comorack-96 can hold 96 (8×12) individual 1.40ml round bottom tubes. The Comorack-96 is made from Polycarbonate and manufactured to the industry leading strict tolerances. The rack is standardly supplied with a pre-labelled 1D barcode on side of the rack.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
Proven Top Quality Sample Storage Tubes
With a working volume of 1.14ml*, Micronic 1.40ml round bottom tubes are proven to be an industry standard solution for many sample storage applications. Available in non-coded or alphanumeric coded versions, Micronic 1.40ml round bottom tubes provide an affordable way to improve your sample storage, handling and logistic processes. Micronic 1.40ml tubes can be purchased in bulk lots, refills or racked for 96-tube format use in the Comorack-96.
Manufactured from highest medical grade polypropylene in a fully automated class 7 cleanroom environment ensures Micronic 1.40ml tubes exhibit absolute product consistency, no extractables and compliance with US and European Pharmacopoeia tests. Micronic 1.40ml sample storage tubes resist many organic solvents (DMSO, methanol, dichloromethane), may be autoclaved clean and can be gamma irradiated without loss of product performance. The 1.40ml tube design includes a push cap which provides secure sealing for long-term storage.
*Ambient temperature
features & benefits
Comorack-96
Easy to use
Easily opened with one hand
Safe
Secure and safe locking system
Autoclavable
Autoclavable up to 100 times
Standard ANSI / SLAS format
Based on the Society for Laboratory Automations and Screening (ANSI / SLAS) standards for storage racks
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
CLASS 7 CLEAN ROOM
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications
Product information
| Parameter | Comorack-96 |
|---|---|
| Material | Polycarbonate |
| Rack height | 31.1mm |
| Rack height with cover | 52.0mm |
| Rack length | 128.7mm |
| Rack width | 85.5mm |
| Chemical resistance | + |
| Temperature range | -80°C to +140°C |
Testimonials
What our customers say
article numbers
Ordering information
Tube storage racks in 96-well format
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP22504 | Comorack-96 (including cover) (polycarbonate) | 10 racks | 4 |
Contact
Interested in this product?
We're here to help you with any questions you might have
Ellie van Essen
fill out the form below
Related products
More interesting products
Economical solution
EVA Push Caps
The EVA Push Caps from Micronic provide a cost effective way to securely close sample storage tubes within a 96-well format.
Manual Push Cap Decappers
All manual decappers are compatible with the Micronic TPE Push Caps, TPE LyoCaps and EVA Push Caps in 96-well format of 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml, and 2.50ml tubes.
Cost-effective solution
Micronic Push Cap Capper CP400
The Micronic Push Cap Capper CP400 offers a cost effective way of applying uniform pressure to Push Caps in an entire 96 tubes rack in only a single action.