The 0.75ml tubes enable you to store your valuable samples in a safe and traceable way. Available in a push cap and screw cap version. Working volume (+21°C): 0.48ml with Screw Cap.
Micronic operates corporate integrated Quality Management System (QMS) that is certified to ISO 9001:2015.
Reducing our impact on the environment is an integral part of our continuous improvement efforts. The environmental policy of Micronic is determined by our headquarters in the Netherlands, which is certified to ISO 14001:2015.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criteria is that no measurable amount of extractables should leach into samples.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic labware products are developed and manufactured in compliance with the European Directive 98/79/EC for In Vitro Diagnostic Medical Devices, Annex III.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at firstname.lastname@example.org.
The 2D Data-Matrix coded tubes and Code Readers of Micronic are used by researchers worldwide to guarantee the traceability of valuable samples during the sample storage process. The unique 2D code of each tube can be scanned to identify a sample, its coordinates within a storage rack, the particular freezer and the location of the rack in the freezer. In addition to providing reliable long-term sample identification, the high quality Micronic labware ensures that the integrity of samples is preserved at ultra-low temperatures over extended periods of time.
Micronic offers a comprehensive range of 2D Data-Matrix coded tubes. Precision manufactured from ultra-pure grade Polypropylene in a certified Class 7 clean room production environment, the tubes resist many organic solvents (DMSO, methanol, dichloromethane), may be autoclaved clean and can be gamma irradiated without loss of product performance. Manufactured to the industry leading strict tolerances, the tube-to-tube consistency of Micronic labware maximizes operational uptime when used in combination with automated systems.
Want to get started using 2D coded tubes? Check out our Starter Packs that offer a substantial saving over buying the products individually!
|Parameter||0.80ml Tubes External Thread|
|Inner tube shape||V-bottom|
|Material||Medical approved Polypropylene (CE-IVD)|
|Working volume (+21ºC)||0.75ml (with Screw Cap) / 0.68ml (with Push Cap)|
|Tube height in rack||35.5mm (without cover)|
|Temperature range||Vapor phase LN2 to +100°C|
“We chose Micronic because of their compatibility with liquid handling robotics, validated ultra-low binding tube properties, highly satisfying split push cap sealing performance, and the assured traceability that their laser etched 1D barcoded rack and 2D coded tubes provide."
At Micronic our goal is to advance research by serving scientists in finding solutions that contribute to a higher quality of life. This is why it makes us particularly proud to supply the researchers of JUST with the consumables they need for their robotic discovery platform.
“I chose Micronic because of the space saving 96-well rack format; more sample material could fit in the freezer compared to products from other companies. The screw cap also stays securely in place during long-term storage in -80°C."
“After a comprehensive evaluation of commercially available consumables we selected Micronic 0.75ml and 1.4ml tubes together with screw caps and Roborack storage racks to provide high integrity, long-term storage of our human blood, serum and plasma samples at –80°C."
|Article Number||Description||Unit Size||Case Size|
|MP52720||0.80ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom Bulk||960 tubes||4|
|MP52722||0.80ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-3 Rack with low cover (Barcoded A1-H1 side)||10 racks||4|
|Article Number||Description||Unit Size||Case Size|
|MP53820||Screw Caps for externally threaded tubes in 96-well format - Grey||960 caps||1|
|MP53801||Screw Caps for externally threaded tubes in 96-well format - White||960 caps||1|
|MP53804||Screw Caps for externally threaded tubes in 96-well format - Yellow||960 caps||1|
|MP53800||Screw Caps for externally threaded tubes in 96-well format - Orange||960 caps||1|
|MP53802||Screw Caps for externally threaded tubes in 96-well format - Red||960 caps||1|
|MP53821||Screw Caps for externally threaded tubes in 96-well format - Pink||960 caps||1|
|MP53809||Screw Caps for externally threaded tubes in 96-well format - Purple||960 caps||1|
|MP53803||Screw Caps for externally threaded tubes in 96-well format - Blue||960 caps||1|
|MP53806||Screw Caps for externally threaded tubes in 96-well format - Light Blue||960 caps||1|
|MP53823||Screw Caps for externally threaded tubes in 96-well format - Light Green||960 caps||1|
|MP53805||Screw Caps for externally threaded tubes in 96-well format - Green||960 caps||1|
|MP53822||Screw Caps for externally threaded tubes in 96-well format - Black||960 caps||1|