The Micronic 96-1 Rack can hold 96 individual 0.50ml Tubes with Internal Thread, 0.30ml Tubes with External Thread or 0.40ml Tubes with External Thread. The sample storage Micronic 96-1 Rack, based on the global recognized ANSI / SLAS standards for storage racks, features a laser etched 1D rack barcode on one side and an additional 2D code on the rack bottom. Furthermore it features a ‘Twist-Lock’ to prevent tubes from turning during screw (de)capping.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
There is a trend among biorepositories and other laboratory facilities towards laboratory automation in order to increase and maintain sample integrity. This means that tube storage racks need to be designed in such a way that they are compatible with automated storage and handling systems. The Micronic ULT Racks therefore have an automation compatible American National Standards Institute/ Society for Laboratory Automation and Screening (ANSI/SLAS) dimensional footprint.
In addition to the standard ANSI/SLAS footprint, the ULT Racks are provided with more features ideal for automation. These features include: an outstanding Twist-Lock design which prevents tubes from turning during screw (de)capping, easy lead-in tube and cover placement, closed side walls with minimal notches for perfect rack orientation, a unique automation-friendly cover lock system with which closing is achieved by simply moving the locker at each end of the cover downwards. The 1D rack barcode on the side and the 2D Data-Matrix code on the bottom are inseparable with the rack for absolute tracking and tracing of the samples. The Micronic ULT Racks are already tested and in operation at low temperature automated storage systems.
| Parameter | Micronic 96-1 Rack |
|---|---|
| Material | Highest Purity PC |
| Rack height | 12.0mm |
| Height with cover | 23.8mm |
| Rack length | 127,8 |
| Rack width | 85,5 |
| Chemical resistance | ++/+ |
| Temperature range | Vapor phase LN2 to +140ºC |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51201 | Micronic 96-1 Rack with low cover for 0.50ml tubes capped with Push Caps or Low Profile Screw Caps (empty) (barcoded A1-H1 side) | 10 racks | 4 |
| MP51200 | Micronic 96-1 Rack with low cover for 0.30ml tubes capped with Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| MP51202 | Micronic 96-1 Rack with high cover for 0.40ml tubes capped with Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit size | Case Size |
|---|---|---|---|
| MP51220 | Micronic 96-1-DM Rack with low cover for 0.30ml tubes capped with Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| MP51221 | Micronic 96-1-DM Rack with high cover for 0.40ml tubes capped with Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| MP51222 | Micronic 96-1-DM Rack with low cover for 0.50ml tubes capped with Push Caps or Low Profile Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32147 | 0.30ml Non coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP32148 | 0.30ml Non coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1-DM Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52702 | 0.30ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52736 | 0.30ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1-DM Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52702-G71 | 0.30ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Caps IG in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52718 | 0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52737 | 0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-1-DM Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52718-G71 | 0.40ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom precapped with Grey Screw Cap IG in Micronic 96-1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32100 | 0.50ml Non coded Screw Cap tubes V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP32102 | 0.50ml Non coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-1-DM Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42100 | 0.50ml Alphanumeric coded Screw Cap tubes V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42102 | 0.50ml Alphanumeric coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-1-DM Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52500 | 0.50ml 2D Data-Matrix coded Screw Cap tubes V-bottom in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32100-X01 | 0.50ml Non coded Screw Cap tubes V-bottom precapped with TPE Cap Natural in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42100-X01 | 0.50ml Alphanumeric coded Screw Cap tubes V-bottom precapped with TPE Cap Natural in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52500-X01 | 0.50ml 2D Data-Matrix coded Screw Cap tubes V-bottom precapped with TPE Cap Natural in Micronic 96-1 Rack with low cover (Barcoded A1-H1 side) | 10 racks | 4 |
The Micronic Push Cap Capper CP400 offers a cost effective way of applying uniform pressure to Push Caps in an entire 96 tubes rack in only a single action.
The Micronic Rack Reader DR505 features a passive anti-frost system, which enables users to read racks filled with 2D codes tubes straight from the freezer.
The award winning Micronic Screw Cap Recapper CS700 offers users the ability to cap, decap or recap 96, 48 or 24 tubes with Screw Caps in a single action.
The automation-friendly 0.40ml tube enables efficient storage of low volumes of liquid samples. This tube has a massive working volume of 0.40ml (+21ºC) with Screw Cap.