The unique Micronic 96-5 Rack can hold 96 individual 2.00ml tubes with internal thread or external thread. The Micronic 96-5 Rack is based on the Society for Laboratory Automation and Screening (ANSI/SLAS) standards for storage racks. The racks are precision manufactured in a certified class 7 clean room production facility with materials that are selected on quality and the highest purity levels.
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Drawing upon over 30 years of experience in manufacturing and supplying traceable sample storage solutions to research centers and laboratory facilities, Micronic has developed a Next Generation Ultra-Low Temperature Tube Storage Rack Range. The Micronic Ultra-Low Temperature (ULT) Racks do not simply have a nicer design – they are better in every way. The racks have many unique features including its extremely strong design for cryogenic storage, a novel “icebreaker” cover lock mechanism, cover prints indicating rack and tube type, rack orientation marks and a highly transparent cover which enables easy visual checking of the enclosed samples.
Precision manufactured in a certified Class 7 clean room production facility, the Micronic ULT Racks are based on the Society for Laboratory Automation and Screening (ANSI/SLAS) standards for storage racks and accommodate 96, 48 or 24 tubes. Absolute traceability and reproducibility on the racks is ensured through novel laser-etched alphanumeric visual location aids on top of the racks and a unique laser-etched 1D barcode on the side of the racks. The open bottom design of the storage racks facilitate quick defrosting of samples. The racks may be autoclaved several times providing considerable cost savings over onsumable sample storage products.
| Parameter | Micronic 96-5 Rack |
|---|---|
| Material | Highest Purity PC |
| Rack height | 41.0mm |
| Height with cover | 74.3mm |
| Rack length | 127.8mm |
| Rack width | 85.48mm |
| Chemical resistance | ++/+ |
| Temperature range | Vapor phase LN2 to +140ºC |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51215 | Micronic 96-5 Rack with low cover for 2.00ml tubes capped with Push Caps or Low Profile Screw Caps (empty) (barcoded A1-H1 side) | 6 racks | 4 |
| MP51216 | Micronic 96-5 Rack with high cover for 2.00ml tubes capped Screw Caps (empty) (barcoded A1-H1 side) | 6 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52359 | 2.00ml 2D Data-Matrix coded Screw Cap tubes U-bottom Bulk | 576 tubes | 4 |
| MP52570 | 2.00ml 2D Data-Matrix coded Screw Cap tubes U-bottom in Micronic 96-5 Rack with low cover (Barcoded A1-H1 side) | 6 racks | 4 |
| MP52571 | 2.00ml 2D Data-Matrix coded Screw Cap tubes U-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1 side) | 6 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52712 | 2.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom Bulk | 576 tubes | 4 |
| MP52714 | 2.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread V-bottom in Micronic 96-5 Rack with high cover (Barcoded A1-H1 side) | 6 racks | 4 |
The 2.00ml tubes combine high sample storage capacity and absolute sample traceability in an industry standard 96-well configuration. Working volume (+21°C): 1.49ml with Screw Cap.
The 2.00ml tubes with external thread hybrid guarantee sample traceability and provide a high working volume (1.95ml at +21°C with a Screw Cap) with a relatively low tube height.
The Micronic Screw Caps for tubes with external thread have a triple start thread for the most optimal sealing quality, ensuring long-term sample preservation and storage at ultra-low temperatures.
The handheld device offers users the ability to cap, decap or recap a row of 8, 6 or 4 tubes in less than 5 seconds – 10 times faster than by hand!