Sample storage Caps

TPE Capmat-96

The Micronic TPE Capmat is compatible with 96-well format tubes. The TPE capmat is a sheet of 96 caps with a fixed foil that can be used to seal a full rack of 96 tubes at once. Unlike tubes capped with a TPE capcluster, tubes capped with a TPE capmat cannot be individually removed from the rack—all 96 tubes are capped together. The Micronic TPE cap formats are: the Capcluster-96, the Capmat-96 and the Capband-8 or -12.

Click here to read more about Micronic product quality information.

Our solutions

For tubes with internal & external thread

The Micronic TPE Push Caps for tubes in 96-well format are compatible with the 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml, and 2.50ml internally threaded tubes, and the 0.30ml, 0.40ml, 0.75ml, 0.80ml, 1.40ml and 2.00ml externally threaded tubes from Micronic. Several TPE cap formats are available: the Capcluster-96 which leaves each tube individually capped, the Capmat-96 holds 96 caps in a fixed foil in which the tubes are sealed together, and the Capband-8 comes in a mat format with tear off lines to obtain cap strips. The TPE Capmat-96 is available in 8 different colors (natural, grey, yellow, red, pink, blue, light green, and black), the TPE capmats are pierceable and available pre-split, sterile, and DNase/RNase free.

features & benefits

TPE Push Caps Capmat-96

Multi-pierceable
Multi-pierceable without losing seal integrity
Cost-effective
Economical solution for sample storage at temperatures down to -80°C
Compatibility
Compatible with Micronic tubes in 96-format
Resistancy
Resists chemical solvents
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications

Product information

Parameter TPE Push Caps (Capmat-96)
Material Thermo Plastic Elastomer
Cap height 4.8mm
Chemical resistance +++
Available colors Natural + 7 different colors
Temperature range -80°C to +100°C
Testimonials

What our customers say

"We use the Micronic sample storage products because the individual barcoded tubes allows us to easily swap tubes from plate to plate. Previously, we would make up a new plate using an aliquot of sample. By instead swapping the tubes, we no longer need to split the sample up when we need to analysis the sample again. As we have over 70,000 DNA samples, it is preferable to keep a sample in a single tube then split over several plates."

Read full testimonial

The Nees Institute for Plant Biodiversity selected Micronic 0.50ml 2D Data-Matrix coded tubes together with TPE caps to provide high integrity, long-term storage of their samples at -80°C.

Read full testimonial

The University of Edinburgh and the Natural History Museum are using, as part of the 'Insect Pollinators Initiative', the Micronic 4.00ml tube for storing the larger insects in the collection.

Read full testimonial

“I chose Micronic because of the space saving 96-well rack format; more sample material could fit in the freezer compared to products from other companies. The screw cap also stays securely in place during long-term storage in -80°C."

Read full testimonial

Using a unique tube coding system from Micronic, the Animal Sciences Group has been able to significantly improve the absolute traceability, throughput and long term storage integrity of labelled samples going through their laboratory.

Read full testimonial
Agriculture Victoria cutout
The University of Edinburgh group research project in the multi-funder UK Insect Pollinators Initiative
PhD candidate at LUMC Nienke van Rein chose Micronic because of the space saving 96-well rack format
Agriculture Victoria (AUS)
Contact

Interested in this product?

We're here to help you with any questions you might have
fill out the form below
  • This field is for validation purposes and should be left unchanged.
article numbers

Ordering information

Article Number Description Unit Size Case Size
MP53985 Pierceable TPE Capmat Natural for capping 96 tubes with external thread (virgin TPE material) 10 mats 24
Article Number Description Unit Size Case Size
MP53990 Pierceable TPE Capmat Natural for capping 96 tubes with external thread (virgin TPE material) 4 x 10 mats 1
Article Number Description Unit Size Case Size
MP53074 Pierceable TPE Capmat for capping 96 individual tubes - VARIA package: Grey, Natural, Yellow, Red, Pink, Blue, Light Green, Black (10 mats per color) 80 mats 1
MP53000 Pierceable TPE Capmat Natural for capping 96 tubes (virgin TPE material) 10 mats 24
MP53017 Pierceable TPE Capmat Yellow for capping 96 tubes 10 mats 24
Article Number Description Unit Size Case Size
MP53081 Pierceable TPE Capmat Natural for capping 96 tubes 4 x 10 mats 1
MP53082 Pierceable TPE Capmat Blue for capping 96 tubes 4 x 10 mats 1
MP53083 Pierceable TPE Capmat Light Green for capping 96 tubes 4 x 10 mats 1
MP53084 Pierceable TPE Capmat Grey for capping 96 tubes 4 x 10 mats 1
MP53085 Pierceable TPE Capmat Pink for capping 96 tubes 4 x 10 mats 1
MP53086 Pierceable TPE Capmat Red for capping 96 tubes 4 x 10 mats 1
MP53087 Pierceable TPE Capmat Black for capping 96 tubes 4 x 10 mats 1
MP53088 Pierceable TPE Capmat Yellow for capping 96 tubes 4 x 10 mats 1
Article Number Description Unit Size Case Size
MP53052 Split TPE Capmat Natural for capping 96 tubes (virgin TPE material) 10 pieces 24