Micronic Rack Reader DR710
The DR710 is equipped with a uniquely designed active anti-frost system so that tube codes from even frozen samples can be read.
Find your ideal sample storage tube: Tube Wizard
Sample Storage Tubes
4.00ml Tubes External Thread
The 4.00ml tube with external thread has a massive working volume. The sample storage tube is ideal for solid or large volumes of liquid samples. Using externally threaded storage tubes eliminates the possibility of the sample coming into contact with the screw thread, minimizing chance of cross-contamination while improving sample integrity. This and the sturdy design of the tube make the 4.00ml tube with external thread suitable for high speed centrifuging. On the other hand, the wide opening and flat inner bottom enable easy loading and removal of tissue samples using tweezers.
Micronic 4.00ml tubes with a 2D Data-Matrix code permanently laser-etched on the bottom of the tube are the storage medium of choice for customers demanding long-term reliable code reading. The code surface of the tubes with external thread features a raised edge, which protects the 2D code against accidental scratches, ensuring absolute traceability.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
leading the industry with sustainable products
Micronic has joined an elite group of manufacturers committed to product transparency and sustainable procurement. ACT is the first environmental impact factor label for laboratory products, developed by the non-profit My Green Lab. ACT—which stands for accountability, consistency, and transparency—is designed to provide critical information on the environmental impact of laboratory products.
The Micronic 1.40ml and 4.00ml tubes were independently audited by Sustainability Made Simple and verified by My Green Lab, and now carry the ACT label. Reading the ACT label, also known as the Environmental Impact Factor (EIF) label, is simple: the lower the score, the lower the impact on the environment in terms of manufacturing, energy and water use, packaging, and end-of-life. Click here for more information about how to read the label.
features & benefits
4.00ml Tubes External Thread
Optimal sealing
Triple start thread for optimal sealing quality
ultra-low temperature
Thick tube walls, sturdy design and excellent properties for ultra low temperature storage
100% quality control
100% quality control on all 2D codes (readability and uniqueness)
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
AVAILABLE OPTIONS
Sterilization using gamma irradiation or Eto treatment, precapped with screw cap, customized 2D tube code or 1D rack barcode
Specifications
Product information
| Parameter | 4.00ml Tubes External Thread |
|---|---|
| Inner tube shape | Flat bottom |
| Material | Medical approved Polypropylene (CE-IVD) |
| Working volume (+21ºC) | 3.40ml |
| Tube height in rack | 45.0mm (without cover) |
| Resistance | Chemical solvents |
| Temperature range | Vapor phase LN2 to +100°C |
Testimonials
What our customers say
article numbers
Ordering information
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP52808 | 4.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom Bulk | 480 tubes | 4 |
| MP52810 | 4.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom in Micronic 48-4 Rack with high cover (Barcoded A1-F1 side) | 10 racks | 2 |
| MP52808-Y20 | 4.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom precapped with Grey Screw Cap Bulk | 480 tubes | 4 |
| MP52810-Y20 | 4.00ml 2D Data-Matrix coded Screw Cap tubes with External Thread Flat bottom precapped with Grey Screw Cap in Micronic 48-4 Rack with high cover (Barcoded A1-F1 side) | 10 racks | 2 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP53425 | Screw Caps for externally threaded tubes in 48-well format - Transparent | 480 caps | 1 |
| MP53420 | Screw Caps for externally threaded tubes in 48-well format - Grey | 480 caps | 1 |
| MP53401 | Screw Caps for externally threaded tubes in 48-well format - White | 480 caps | 1 |
| MP53404 | Screw Caps for externally threaded tubes in 48-well format - Yellow | 480 caps | 1 |
| MP53400 | Screw Caps for externally threaded tubes in 48-well format - Orange | 480 caps | 1 |
| MP53402 | Screw Caps for externally threaded tubes in 48-well format - Red | 480 caps | 1 |
| MP53409 | Screw Caps for externally threaded tubes in 48-well format - Purple | 480 caps | 1 |
| MP53403 | Screw Caps for externally threaded tubes in 48-well format - Blue | 480 caps | 1 |
| MP53406 | Screw Caps for externally threaded tubes in 48-well format - Light Blue | 480 caps | 1 |
| MP53423 | Screw Caps for externally threaded tubes in 48-well format - Light Green | 480 caps | 1 |
Contact
get in touch
We're here to help you with any questions you might have
Amber Tan
fill out the form below
Related products
More interesting products
Screw Caps with Internal Thread
Micronic Screw Caps for internally threaded tubes securely seal tubes for long-term sample storage at ultra-low temperatures.
Product Deal!
Micronic Screw Cap Recapper CS700
The award winning Micronic Screw Cap Recapper CS700 offers users the ability to cap, decap or recap 96, 48 or 24 tubes with Screw Caps in a single action.