Cost-effective solution
Micronic Push Cap Capper CP400
The Micronic Push Cap Capper CP400 offers a cost effective way of applying uniform pressure to Push Caps in an entire 96 tubes rack in only a single action.
Find your ideal sample storage tube: Tube Wizard
Sample Storage Caps
EVA Push Caps
The EVA Push Caps from Micronic provide a cost effective way to securely close sample storage tubes with in a 96-well format. The EVA Push Caps for tubes in 96-well format are compatible with the 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml, and 2.50ml internally threaded tubes from Micronic. Several EVA cap formats are available: the EVA Capmat-96 holds 96 caps in a fixed format, the EVA Capband-8 comes in a strip of 8 caps and the EVA break-off Capband-8 allows individual caps to be removed from the strip.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
PUSH CAPS FOR TUBES WITH INTERNAL THREAD
The Micronic TPE Push Caps for tubes in 96-well format are compatible with the 0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml, and 2.50ml tubes (internal thread) from Micronic. Several TPE cap formats are available: the Capcluster-96 which leaves each tube individually capped, the Capmat-96 holds 96 caps in a fixed foil in which the tubes are sealed together, and the Capband-8 comes in a mat format with tear off lines to obtain cap strips. The full TPE cap range is available in Natural and 12 different colors.
Micronic TPE Lyo Caps-96 are specially developed for the lyophilisation process as the vents in the caps allow water vapor to escape from the tubes. The TPE Lyo Caps are compatible with all 96-well format tubes (internal thread) and available in a Capcluster-96 format. The EVA Push Caps from Micronic are a cost effective way to securely close sample storage tubes. The EVA Push Caps are compatible with 1.40ml round bottom internally threaded tubes and available in Capmat-96, Capband-8 and break-off Capband-8 (transparent).
features & benefits
EVA Push Caps
Affordable
Cost-effective solution
Compatibility
Compatible with Micronic tubes in 96-format
Resistancy
Resists chemical solvents
Compliant
Compliant with the US and European Food contact regulations
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications
Product information
| Parameter | EVA Push Caps (capmat-96) |
|---|---|
| Material | Ethyl Vinyl Acetate |
| Cap height | 5.88mm |
| Chemical resistance | ++ |
| Temperature range | -40°C to +100°C |
| Parameter | EVA Push Caps (break-off) |
|---|---|
| Material | Ethyl Vinyl Acetate |
| Cap height | 6.0mm / 5.5mm |
| Chemical resistance | ++ |
| Temperature range | -40°C to +100°C |
Testimonials
What our customers say
article numbers
Ordering information
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP82605 | EVA Capband break-off for capping 1 tube | 1.000 bands | 4 |
| MP227B1 | EVA Capband for capping 8 tubes | 120 bands | 24 |
| MP227C2 | EVA Capband for capping 8 tubes | 1000 bands | 4 |
| MP33000 | EVA Capmat for capping 96 tubes | 10 mats | 24 |
| MP33001 | EVA Capmat for capping 96 tubes for Comorack-96 only (polycarbonate) | 10 mats | 24 |
Contact
Interested in this product?
We're here to help you with any questions you might have
Remi van Liempt
fill out the form below
Related products
More interesting products
Micronic Push Cap Capper CP600/CP610
The Push Cap Capper CP600 & CP610 can cap Micronic Push Caps (i.e. Capclusters or Capmats) on 96-format tubes with internal thread in rack.
TPE Capcluster-96
The Micronic TPE Capcluster is compatible with 96-well format tubes. The TPE Capcluster is available in Natural + 12 different colors, providing for visual color identification.
1.40ml Tubes Internal Thread
The 1.40ml tubes with internal thread are provided with a code surface that cannot be separated from the tube. Working volume with Screw Cap (+21°C): 1.04ml (V-bottom) or 1.10ml (U-bottom).