0.50ml Tubes Internal Thread
Save between 35% - 50% of your freezer space. The small 0.50ml sample vials can be supplied non-coded, alphanumeric coded or with an 2D code. Working volume (+21ºC): 0.21ml with Screw Cap.
Find your ideal sample storage tube: Tube Wizard
Sample Storage Racks
Micronic 96-Q1 Rack
The Micronic 96-Q1 Rack holds 96 individual 0.50ml internally threaded tubes with Screw Caps. The sample storage Micronic 96-Q1 Rack, has an extremely strong design which minimizes deformation due to temperature changes. The rack is made from Polycarbonate which has excellent properties for low temperatures (vapor phase LN2). The sample storage Micronic 96-Q1 Rack, based on the global recognized ANSI / SLAS standards for storage racks, features a laser etched 1D rack barcode on one side and an additional 2D code on the rack bottom.
Our Standards
Product Quality Information
Certified Class 7 clean room
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment (which is comparable to the US Federal Standard 209E Class 10,000).
Virgin material and approvals
For the manufacturing of its long term sample storage labware products Micronic uses solely virgin plastic raw material. The raw materials and auxiliary agents are selected based on the specifications that satisfy the high quality requirements of our products. The materials are FDA approved and comply with the (USA) USP XXII tests, including class VI (Medical approved), and the European Pharmacopoeia-monograph 3.2.2 unless communicated otherwise. Material components used to produce Micronic labware can be traced via the lot number indicated on the packaging.
Extractables
The materials used for Micronic tubes are the result of extensive research. One selection criterion is that the amount of measurable extractables leaching into samples is minimized.
RNase, DNase and endotoxin (pyrogen)
By maintaining the highest possible hygiene level during our production processes, Micronic manufactured labware is free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml). Our products are periodically tested on RNase, DNase and their endotoxin levels by independent expert organizations.
Laser-etched codes
The Micronic 2D Data-Matrix codes and 1D barcodes are produced conform industry standards. The 2D Data-Matrix code (which adheres to the ECC200 standard) and 1D barcode (type 128B) are laser-etched into the code area and are guaranteed unique.
Product quality control
Products produced by Micronic are tested according to AQL inspection level G2 and AQL value 0.4.
CE marking
Micronic Sample Storage tubes are classified as general laboratory products according to leading European Life Science Organizations (GAMBICA, FHI, LABMAS, Laborama, SPECTARIS). More information can be found here.
Decontamination
Upon request, Micronic products can be supplied gamma irradiated or ethylene oxide treated.
IATA
Our products comply with the IATA requirements for the transport of diagnostic specimens (UN packing instruction 602 and 650), assuming that our products are properly used (closed).
If you have any additional questions on the quality and safety of our products, please feel free to contact Micronic at sales@micronic.com.
Our solutions
A STATE-OF-THE-ART RACK RANGE
Drawing upon over 30 years of experience in manufacturing and supplying traceable sample storage solutions to research centers and laboratory facilities, Micronic has developed a Next Generation Ultra-Low Temperature Tube Storage Rack Range. The Micronic Ultra-Low Temperature (ULT) Racks do not simply have a nicer design – they are better in every way. The racks have many unique features including its extremely strong design for cryogenic storage, a novel “icebreaker” cover lock mechanism, cover prints indicating rack and tube type, rack orientation marks and a highly transparent cover which enables easy visual checking of the enclosed samples.
Precision manufactured in a certified Class 7 clean room production facility, the Micronic ULT Racks are based on the Society for Laboratory Automation and Screening (ANSI/SLAS) standards for storage racks and accommodate 96, 48 or 24 tubes. Absolute traceability and reproducibility on the racks is ensured through novel laser-etched alphanumeric visual location aids on top of the racks, a unique laser-etched 1D barcode and human readable code on the side of the racks and a 2D Data-Matrix code on the bottom of the rack. The open bottom design of the storage racks facilitate quick defrosting of samples. The racks may be autoclaved several times providing considerable cost savings over onsumable sample storage products.
features & benefits
Micronic 96-Q1 Rack
Rack identifiers
Unique laser-etched Alphanumeric coding on top of the rack, 1D barcode with a human readable code on the side of the rack and a 2D Data-Matrix code on the bottom
ultra-low temperatures
Made from Polycarbonate which has excellent properties for low temperatures
"icebreaker" mechanism
Novel locking system for cryogenic storage: "icebreaker" mechanism
Compatibility
Compatible with the leading sample storage automation systems (-20°C, -80°C and lower temperatures)
RNASE/DNASE/PYROGENS
Free of any detectable RNase or DNase contamination and the endotoxin level of produced and packaged labware is limited to an acceptable minimum (< 0.01 EU/ml)
CLASS 7 CLEAN ROOM
Micronic labware is manufactured and assembled in-house in a NEN-EN-ISO14644-1 Class 7 certified clean room environment
Specifications
Product information
| Parameter | Micronic 96-Q1 Rack |
|---|---|
| Material | Highest Purity PC |
| Rack height | 16.0mm |
| Height with cover | 30.8mm |
| Rack length | 127.8mm |
| Rack width | 85.5mm |
| Chemical resistance | ++/+ |
| Temperature range | Vapor phase LN2 to +140ºC |
Testimonials
What our customers say
article numbers
Ordering information
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51213 | Micronic 96-Q1 Rack with high cover for 0.50ml tubes capped with Screw Caps (empty) (barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP51223 | Micronic 96-Q1-DM Rack with high cover for 0.50ml tubes capped with Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| MP51224 | Micronic 96-Q1-DM Rack with low cover for 0.50ml tubes capped with Push Caps or Low Profile Screw Caps (empty) (Barcoded A1-H1 side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32101 | 0.50ml Non coded Screw Cap tubes V-bottom in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP32103 | 0.50ml Non coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-Q1-DM Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42101 | 0.50ml Alphanumeric coded Screw Cap tubes V-bottom in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42103 | 0.50ml Alphanumeric coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-Q1-DM Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52501 | 0.50ml 2D Data-Matrix coded Screw Cap tubes V-bottom in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1-side) | 10 racks | 4 |
| MP52503 | 0.50ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-Q1-DM Rack with high cover (Barcoded A1-H1-side) | 10 racks | 4 |
| MP52504 | 0.50ml 2D Data-Matrix coded Screw Cap tubes with Internal Thread V-bottom in Micronic 96-Q1-DM Rack with low cover (Barcoded A1-H1-side) | 10 racks | 4 |
| Article Number | Description | Unit Size | Case Size |
|---|---|---|---|
| MP32101-Z20 | 0.50ml Non coded Screw Cap tubes V-bottom precapped with Grey Screw Cap in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP42101-Z20 | 0.50ml Alphanumeric coded Screw Cap tubes V-bottom precapped with Grey Screw Cap in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
| MP52501-Z20 | 0.50ml 2D Data-Matrix coded Screw Cap tubes V-bottom precapped with Grey Screw Cap in Micronic 96-Q1 Rack with high cover (Barcoded A1-H1 side) | 10 racks | 4 |
Contact
get in touch
We're here to help you with any questions you might have
Elena Zhou
fill out the form below
Related products
More interesting products
Micronic Tube Reader DT300
Due to its compact size and wireless operation, the DT300 offers convenient, high performance scanning anywhere where you might need it.
TPE Capcluster-96
The Micronic TPE Capcluster is compatible with 96-well format tubes. The TPE Capcluster is available in Natural + 12 different colors, providing for visual color identification.
Screw Caps with External Thread
The Micronic Screw Caps for tubes with external thread have a triple start thread for the most optimal sealing quality, ensuring long-term sample preservation and storage at ultra-low temperatures.